Chlorophyll pigment concentrations in sediment
Type of resources
Topics
Keywords
Contact for the resource
Provided by
Years
Representation types
Update frequencies
-
The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN contaminants and biological effects in sediment data start in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).
-
This dataset consists of measurements of underway meteorology, navigation and sea surface hydrography collected aboard RRS James Cook cruise JC156, which ran between Southampton and Guadeloupe from the 20th of December 2017 to the 1st of February 2018. Navigation data were collected using an Applanix POSMV system and meteorology and sea surface hydrography were collected using the NMF Surfmet system. Both systems were run through the duration of the cruise, excepting times for cleaning, entering and leaving port, and while alongside. This cruise formed the field component of NERC Discovery Science project ‘FRidge: The impact of mid-Ocean Ridges on the Ocean’s Iron Cycle’. The main objectives of the project are to: 1. Document the changes in iron supply, cycling and speciation along the diverse hydrothermal systems of the northern Mid-Atlantic Ridge. 2. Link observational science with state of the art ocean modelling to assess the global influence of mid-ocean ridges on the ocean iron cycle and the sustenance of surface productivity. To deliver on these objectives, a research expedition to the Atlantic Ocean was carried out to measure trace metals, nutrients and ocean physics over and around the Mid-Atlantic Ridge. Ultimately, this will be able to address the broader question of how the amount of iron from mid-ocean ridges can influence phytoplankton growth in the open ocean. The Discovery Science project was composed of Standard Grant reference NE/N010396/1 as the lead grant with child grant NE/N009525/1. The lead grant runs from 04 September 2017 to 03 March 2020, and was led by Professor Maeve Lohan of University of Southampton, School of Ocean and Earth Sciences. The child grant runs from 01 August 2017 to 31 Audust 2020, and was led by Dr Alessandro Tagliabue. The data from this project will be a part of the UK contribution to the international GEOTRACES programme. Research takes place along the GEOTRACES International Section GA13. The underway discrete salinity samples data and the underway navigation, meteorology and sea surface hydrography data have been received by BODC as raw files from the RRS James Cook, processed and quality controlled using in-house BODC procedures and are will be made available online in the near future.
-
The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN dataset starts in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).
-
The dataset contains hydrographic, biogeochemical and biological measurements of ocean and seabed sediment properties. Hydrographic profiles provided measurements of temperature, salinity, dissolved oxygen and fluorescence to accompany biogeochemical and biological samples, including concentrations of nutrients, particulate organic carbon (POC) and particulate organic nitrogen (PON). Emphasis was placed on the collection of benthic data, with numerous core samples being collected and analysed for pigments, biomarkers, lipids and other organic compounds. Samples were also collected and analysed for Holothurian species, while a large volume in situ filtration system was used to measure biogeochemical variables including POC and PON, and particulate iron. Station data were supplemented by continuous underway measurements of bathymetry, current velocities, sea surface salinity, temperature, fluorescence and beam attenuation across the survey area. These were accompanied by underway measurements of surface meteorological parameters including irradiance, air temperature, humidity, sea level pressure and wind velocities. The data were collected across the Crozet Plateau in the Southern Indian Ocean between 1st December 2005 and 14th January 2006 on RRS Discovery cruise D300. Data collection focused on four sites, with repeated hydrographic profiles, water and sediment samples collected at each location. In total, 89 instrumentation deployments were carried out at the four stations, including a conductivity-temperature-depth (CTD) package and a Megacorer (for sediment sampling). The underway system utilised a hull-mounted acoustic Doppler current profiler (ADCP) as well as a thermosalinograph and other standard surface hydrographic and meteorological instruments. Further data were collected using a variety of equipment including an otter trawl (net) and submersible cameras but these data are currently held by the data originators and are undergoing processing so are not included in the parameter and instrument lists above. The principal objective of Benthic CROZEX was to assess the manner in which biogeochemical composition and flux of organic matter to the deep-sea floor drives benthic community structure, dynamics and diversity at sites with contrasting primary production regimes. Investigators from British Antarctic Survey (BAS), Natural History Museum (NHM), National Oceanographic Centre (NOC) and the National University of Ireland, Galway (NUIG) were involved. Data management is being undertaken by the British Oceanographic Data Centre (BODC) but data processing is ongoing and various data are yet to be submitted to BODC.
-
The dataset includes a wide range of physical, chemical and biological oceanographic parameters. Physical hydrographic measurements include temperature, salinity, optical backscatter, current velocities and turbulence, while biogeochemical measurements in the water column include dissolved oxygen, organic carbon and nitrogen, and nutrients. Biogeochemical parameters were also measured in sediment cores, while phytoplankton and zooplankton data were also collected. The marine data were supplemented by meteorological measurements including temperature, pressure, irradiance and wind. The experimental phase of the project was undertaken in the North Sea between 1998 and 1999, and data were collected at two contrasting sites: Northern North Sea (NNS, 59deg 20.0E, 1deg 00.0E) and Southern North Sea (SNS, 52deg 15.0N, 4deg 17.0E). At both locations measurements were concentrated at a central position with additional measurements being made to estimate horizontal gradients. Moored instruments were deployed at NNS from September - November 1998 and at SNS from March - May 1999. Each experiment was supported by intensive measurement series made from oceanographic ships and involving turbulence dissipation profiler, conductivity-temperature-depth (CTD) profilers, particle size profilers, optical profilers, benthic sampling and water bottle sampling. PROVESS is an interdisciplinary study of the vertical fluxes of properties through the water column and the surface and bottom boundary layers with the aim of improving understanding and quantification of vertical exchange processes in the water column. Scientists from 18 institutions distributed in 8 European countries participated in the fieldwork and modelling parts of the programme and was co-ordinated by John Howarth of the Proudman Oceanographic Laboratory. The British Oceanographic Data Centre (BODC) is responsible for assembling the data collected during the project into a comprehensive data set. The data has been organised onto a CD-ROM product available through BODC.
-
The dataset contains physical, biogeochemical and biological data, including measurements of water temperature, salinity, fluorescence, dissolved gases and current velocities; plankton samples from nets and plankton recorders; water samples for analysis of nutrients, phytoplankton, radioactivity and biogeochemical parameters; benthic cores; meteorological time series (pressure, temperature, humidity, wind velocities); atmospheric samples and ocean-atmosphere fluxes; and results from incubation experiments. The data were collected north of the Crozet Plateau in the Southern Ocean/Southwest Indian Ocean on RRS Discovery cruises D285 (3rd November - 10th December 2004) and D286 (13th December 2004 - 21st January 2005). Much of the data collection focussed on a series of Major Stations (called M1 to M10), with measurements being collected at these stations every two or three days. Conductivity-temperature-depth (CTD) casts were undertaken at each station, providing both hydrographic data and water samples from a range of depths. Other work at each Major Station included zooplankton nets, Longhurst-Hardy Plankton Recorder (LHPR) tows, sediment coring and Argo float deployment. In between Major Stations some additional CTD casts were undertaken. The SeaSoar oceanographic undulator provided further hydrographic data, while hull-mounted acoustic Doppler current profilers (ADCPs) provided current velocity data across the survey area. In addition, continuous underway measurements of hydrographic and meteorological parameters and surface water samples were collected along the cruise track. Five moorings were deployed, one of which was recovered at the end of D286. The other four, including sediment traps, current profilers and CTDs were deployed for one year. CROZEX (CROZet circulation, iron fertilization and Export production experiment) is a complex, multidisciplinary project to examine, from surface to sediment, the structure, causes and consequences of a naturally occurring annual phytoplankton bloom that forms. This collaborative project involved researchers in Ireland and the UK, and was administered by the National Oceanography Centre (NOC), Southampton. Data are managed by the British Oceanographic Data Centre. Much of the CROZEX data processing is ongoing and a number of datasets have yet to be submitted to BODC. The data described here are those presently held by BODC, with the exception of the Argo floats (these data are not expected by BODC and should be accessible via the Argo website) and the four year-long mooring deployments (data from these will be submitted to BODC in the future).
-
The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing well over 1000 parameters. There are data from over 1000 conductivity-temperature-depth (CTD)/rosette stations, over 440 core profiles, over 180 sediment trap samples, over 140 net hauls and much, much more. The primary study area was a box extending to the base of the slope from Vigo to Cap Finistere. However, data are included from both further offshore (filament tracking) and from the Portuguese Margin. Measurements were taken from November 1996 to October 1999 during 33 cruise legs, involving research vessels from seven nations. Data were collected using a variety of equipment and techniques, including expendable bathythermographs (XBTs), turbulence probes, CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and a comprehensive water sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and phosphate uptake experiments are also included in the dataset, as are bathymetric data from multibeam (swath) surveys, coastal upwelling measurements and data from moored instruments and benthic landers. The dataset also includes imagery from satellites, seabed photography and X-ray photographs of core samples. The aim of the project was study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. The project brought together over 100 scientists from 40 research centres and universities throughout Europe. The British Oceanographic Data Centre (BODC) is assembling the data sets collected during OMEX II into its project database system and the data set is also available on CD-ROM.
-
The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing over 1000 parameters. There are data from over 1650 conductivity-temperature-depth (CTD)/rosette stations, over 300 core profiles, over 370 sediment trap samples and much, much more. Most of this effort was directed at the region of the east Atlantic margin between La Chapelle Bank and the Goban Spur (between France and Ireland). In addition, there were two secondary areas of interest: the Norwegian Shelf Break just off Tromso and the Iberian Margin, either off Vigo or in the vicinity of the Tagus estuary. Measurements were collected from April 1993 until the end of December 1995 during 55 research cruise legs. Data were collected using a variety of equipment and techniques, including expendable bathythermography (XBTs), CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and comprehensive water and air sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and trace metal experiments are also included in the dataset, as are bathymetric data from the British Oceanographic Data Centre (BODC) GEBCO digital Atlas, air-sea flux measurements and data from moored instruments and benthic landers that were deployed for periods from a few weeks to a year. The dataset also includes imagery from satellites, water column and seabed photography, scanning electron micrographs and X-ray photographs. FORTRAN source code for biogeochemical models developed during OMEX I is also included. The aim of the project was to study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. OMEX I involved scientists from 30 institutions in 10 countries. BODC is assembling the data sets collected during OMEX I into its database system and the data are also available on CD-ROM.