Contact for the resource

Stanford University

8 record(s)
 
Type of resources
Topics
Keywords
Contact for the resource
Provided by
Years
Representation types
Update frequencies
status
From 1 - 8 / 8
  • Polarimetric phase-sensitive radar measurements were collected at the Western Antarctic Ice Sheet (WAIS) Divide on the 25th and 26th December 2019. The measurements were conducted at 10 sites along a 6 km-long transect ~5-10 km northeast of the location of the WAIS Divide Deep Ice Core. At each site, a suite of four quadrature (quad-) polarimetric measurements were collected using an autonomous phase-sensitive radio echo sounder (ApRES) in a single-input single-output (SISO) configuration. The study is part of the Thwaites Interdisciplinary Margin Evolution (TIME) project of the International Thwaites Glacier Collaboration (ITGC), and is a collaboration between the United States National Science Foundation (NSF) and the United Kingdom Natural Environment Research Council (NERC). It was funded by UK Natural Environment Research Council (NERC) research grant NE/S006788/1 and USA National Science Foundation (NSF) research grant 1739027.

  • We use polarimetric radar sounding to investigate variation in ice crystal orientation fabric within the near-surface (top 40-300 m) of Rutford Ice Stream, West Antarctica. To assess the influence of the fabric on ice flow, we use an analytical model to derive anisotropic enhancements of the flow law from the fabric measurements. In the shallowest ice (40-100 m) the azimuthal fabric orientation is consistent with flow-induced development and correlates with the surface strain field. Notably, toward the ice-stream margins, both the horizontal compression angle and fabric orientation tend toward 45 degrees relative to ice flow. This result is consistent with theoretical predictions of flow-induced fabric under simple shear, but to our knowledge has never been observed. The fabric orientation in deeper ice (100-300 m) is significantly misaligned with shallower ice in some locations, and therefore inconsistent with the local surface strain field. This result represents a new challenge for ice flow models which typically infer basal properties from the surface conditions assuming simplified vertical variation of ice flow. Our technique retrieves azimuthal variations in fabric but is insensitive to vertical variation, and we therefore constrain the fabric and rheology within two end-members: a vertical girdle or a horizontal pole. Our hypotheses are that fabric near the center of the ice-stream tends to a vertical girdle that enhances horizontal compression, and near the ice-stream margins tends to a horizontal pole that enhances lateral shear. ApRES radar data were collected as part of the BEAMISH Project (NERC AFI award numbers NE/G014159/1 and NE/G013187/1). Tom Jordan would like to acknowledge support from EU Horizon 2020 grant 747336-BRISRES-H2020-MSCA-IF-2016. ***** PLEASE BE ADVISED THIS DATA SET HAS BEEN RETRACTED ***** This data set had incorrect coordinates for one of the sites. In addition, some files were incorrectly labelled as belonging to one of the sites A new data set (see 'Related Data Set Metadata' link below) addresses these issues and also includes significant additional data, as well as updated metadata and additional authors. Hence it is a wholly new data set, rather than an updated version of this data set. Please use this new data set instead.

  • These two files (.csv) provide independent methods of quantifying subglacial roughness in Greenland, both calculated from radio-echo sounding (or ice penetrating radar) data collected by the Operation Ice Bridge programme using CReSIS instrumentation. They are an output of the Basal Properties of Greenland (BPOG) project (http://bpog.blogs.ilrt.org/), with funding from NERC grant NE/M000869/1. Roughness here, and in the wider literature, is defined as the variation in bed elevation (in the vertical) at the ice-bed interface, over a given length-scale. These two metrics calculate/quantify this variation in different ways: one shows topographic-scale roughness, calculated from the variation in along-track topography (bed elevation measurements derived from the radar pulse); and the other shows scattering-derived roughness, calculated from quantifying characteristics of each bed-echo (the return from the radar pulse at the ice-bed interface).

  • This dataset is a recording of passive seismic responses on Eastwind Glacier (Windless Bight, Ross Island, Antarctica), also containing 212 active-source seismic shots made with a hammer and plate source. The data are recorded using fibre optic distributed acoustic sensing (DAS), with a 2.2 km cable length connected into a FEBUS Optics A1 interrogator. The acquisitions take place over a two-hour period from 23:46 UTC on 2024-02-06, to 01:54 UTC on 2024-02-07. The acquisition is part of a broader campaign of seismic measurements to determine grounding line dynamics of Eastwind Glacier and image the bathymetry of the sub-shelf ocean cavity. The data were recorded as part of the ITGC TIME and EGGS ON TOAST projects, by a team from various UK and US institutions. The data are presented as HDF5 files. with supporting information provided in CSV files. NERC/NSF International Thwaites Glacier Collaboration: Thwaites Interdisciplinary Margin Evolution (TIME), NE/S00677X/1 and NSF #1739027. Interrogator loaned from the University of Leeds Fibre Optic Facility under agreement UOL-FOF-0004.

  • We present a new compilation of multibeam-bathymetric data for the inner Amundsen Sea continental shelf beyond Thwaites and Pine Island glaciers (bounding box: 100W to 110W, 74S to 75.5S). The region includes Pine Island Bay, marine areas offshore the Thwaites Ice Shelf to the Crosson Ice Shelf, and covers an area of 74,750 km2. The bathymetric grids were compiled from all available multibeam echosounder (MBES) data acquired by UK, German, USA and Korean scientific cruises to the area between 1999 and 2019 (see lineage). Three grids of sea floor elevation data are available in a range of formats (ESRI ascii interchange format and GMT-compatible netCDF 4byte float): a 50-m resolution grid with no interpolation, a 50-m grid interpolated up to 300 m from cells with real data, and a 500-m resolution grid with no interpolation. Note that these grids have not been merged with regional bathymetric grids and, therefore, do not have continuous coverage (i.e. cells are only populated where multibeam data exist). This work was supported by grants from the National Science Foundation (NSF: Grant OPP- 1738942) and Natural Environment Research Council (NERC: Grant NE/S006664/1) as part of the International Thwaites Glacier Collaboration (ITGC) programme, and grants NE/J005770/1 and NE/J005703/1 as part of the iSTAR Programme.

  • We present here the Bedmap3 ice thickness, bed and surface elevation standardised CSV data points that are used to create the Bedmap3 gridding products in addition to the previous data releases. The data consists of 50 million points acquired by 17 different data providers in Antarctica. The associated Bedmap datasets are listed here: https://www.bas.ac.uk/project/bedmap/#data This work is supported by the SCAR Bedmap project and the British Antarctic Survey's core programme: National Capability - Polar Expertise Supporting UK Research

  • We present here the Bedmap3 ice thickness, bed and surface elevation aggregated points and survey lines. The aggregated points consist of statistically-summarised shapefile points (centred on a continent-wide 500 m x 500 m grid) that reports the average values of Antarctic ice thickness, bed and surface elevation from the full-resolution survey data and information on their distribution. The points presented here correspond to the added points since the last release of Bedmap2. The data comes from 14 different data providers and 75 individual surveys. They are available as geopackages and shapefiles. The associated Bedmap datasets are listed here: https://www.bas.ac.uk/project/bedmap/#data This work is supported by the SCAR Bedmap project and the British Antarctic Survey's core programme: National Capability - Polar Expertise Supporting UK Research

  • We present here Bedmap3, the latest suite of gridded products describing surface elevation, ice-thickness and the seafloor and subglacial bed elevation of Antarctica south of 60degS. Bedmap3 incorporates and adds to all post-1950s datasets previously used for Bedmap1 and Bedmap2, including 84 new aero-geophysical surveys by 15 data providers, an additional 52 million data points and 1.9 million line-kilometres of measurement. This has filled notable gaps in East Antarctica, including the South Pole and Pensacola basin, Dronning Maud Land, Recovery Glacier and Dome Fuji, Princess Elizabeth Land, plus the Antarctic Peninsula, West Antarctic coastlines, and the Transantarctic Mountains. Our new Bedmap3/RINGS grounding line similarly consolidates multiple recent mappings into a single, spatially coherent feature. Combined with updated maps of surface topography, ice shelf thickness, rock outcrops and bathymetry, Bedmap3 reveals in much greater detail the subglacial landscape and distribution of Antarctica's ice, providing new opportunities to interpret continental-scale landscape evolution and to model in detail the past and future evolution of the Antarctic ice sheets. Sponsored by the Scientific Committee on Antarctic Research (SCAR), the Bedmap3 Action group aims to produce a new map and datasets of Antarctic ice thickness and bed topography for the international scientific community. The associated Bedmap datasets are listed here: https://www.bas.ac.uk/project/bedmap/#data