2m
Type of resources
Topics
Keywords
Contact for the resource
Provided by
Years
Formats
Representation types
Update frequencies
-
Surface pressure, temperature and humidity data (PTU) were collected by a Vaisala WXT510 instrument located at the Natural Environment Research Council's (NERC) Mesosphere-Stratosphere-Troposphere (MST) Radar Facility, Capel Dewi, near Aberystwyth in West Wales. Rainfall rate data from this instrument are also available as a separate dataset within the MST Radar Facility dataset collection. The WXT-510 instrument at the site began operational recording in December 2007 and ceased in January 2015, subsequently being replaced by a Vaisala WXT-520 instrument. The WXT520 data are also available from CEDA as part of the MST Radar Facility's dataset collection. Independent surface meteorological data are also collected from a suite of instruments by a Campbell Scientific CR10 Climate Data Logger. These data are available as a separate dataset within the MST Radar Facility dataset collection.
-
Surface meteorological data are measured by a number of instruments deployed at the Natural Environment Research Council's (NERC) Mesosphere-Stratosphere-Troposphere (MST) Radar Facility, Capel Dewi, near Aberystwyth in West Wales. This dataset consists of data collected by the following suite instruments connected to a Campbell Scientific CR10 Climate Data Logger: Campbell Scientific 107 thermistor temperature probe mounted inside an URS1 unaspirated radiation shield. Accuracy: +/- 0.4 degrees C. Vaisala PTB101B barometric pressure sensor. Accuracy: +/- 2.0 hPa. Vaisala HMP45C temperature and relative humidity probe (from which only the humidity measurements are used) mounted inside an URS1 un-aspirated radiation shield. Accuracy: +/- 0.3%. Environmental Measurements ARG100 tipping bucket raingauge. Kipp and Zonen CM3 thermopile pyranometer (WMO second class). Accuracy: +/- 0.5%. The raingauge is located on the ground. All other sensors are mounted on a post approximately 1 m above the ground. The data logger initially samples the atmospheric temperature, pressure and humidity sensors at 5 s intervals. Mean values are calculated over each 60 s and the outputs from the logger represent minima, means and maxima of these 60 s means over each 10 minute sample period. The data logger is connected to a tipping bucket raingauge (sampled every 1 s, and recording tips for each 0.20 mm accumulation of rain); pyranometer (sampled every every 5 s, recording the down-welling radiation within a hemispheric field of view with a flat response in the spectral range 305 - 2800 nm); The data are available in NASA-Ames formatted files. Independent surface meteorological data are also available from the Vaisala WXT510 instrument also located at the site and are available in the wxt510-precipitation and PTU datasets.
-
Surface wind measurements are available from the Vaisala WXT510 surface meteorology instrument deployed at the Natural Environment Research Council's (NERC) Mesosphere-Stratosphere-Troposphere (MST) Radar Facility, Capel Dewi, near Aberystwyth in West Wales from 2007 to 2015. Wind speed and direction are measured by a WINDCAP (R) sensor which consists of an array of three equally-spaced ultrasonic transducers. These transducers are situated approximately 11 cm apart in a horizontal plane, leading to minimum, mean, and maximum values of speed and direction to be recorded. Data are available in netCDF formatted data files to all CEDA registered users under the UK Open Government licence. This instrument has since been replaced by a Vaisala WXT520 surface meteorology instrument at the site. Note - the wind data from this instrument are known to be highly constrained by the valley topography in which the instrument is sited. As such it should not be used as a representation of the broad scale wind field, but may be of interest to those wishing to study valley flows.