From 1 - 10 / 45
  • These data are digital elevation models which describe landscape topography. The data were created to support analysis of landscape change following the 7th February 2021 avalanche-debris flow in Chamoli District, Uttarakhand, India. The data were used as standalone datasets to support this analysis, but also supported numerical modelling using CAESAR-Lisflood (see data collection). The DEMs were created from CNES/Airbus Pléiades-HR stereo satellite imagery captured in along-track mode. They are a geospatial dataset created in raster (.tif) format. They are most commonly imported into GIS software, where they can be analysed or support other forms of geospatial analysis. Full details about this dataset can be found at https://doi.org/10.5285/5a1eaef4-9211-4227-a017-d20b08be5784

  • Results of piston cylinder experiments on lower-crustal material from the Ivrea Zone, Italian Alps. Natural sulfides and sulfide-silicate mixes from lower crustal cumulates were heated and pressurised to conditions matching those of the MASH zone, which is hypothesised to be the source of metals for post-collisional porphyry Cu deposits. This was done in order to simulate partial melting and examine the mobility of metals in this environment. This data contains experimental logs stating the experimental conditions; reflected light photographs of the experimental capsules; scanning electron microscope element maps and identification of platinum group minerals and precious metal minerals in the capsules; and trace element concentration of sulfides in the capsules. This data was collected as part of the TeaSe consortium NERC grant in order to test hypotheses about porphyry Cu deposit formation. This data was collected by researchers at Cardiff University and the University of Edinburgh.

  • This web map service (WMS) is the 1km percentage target class version of the Land Cover Map 2015 (LCM2015) for Great Britain. It shows the percentage cover for each of 21 land cover classes for 1km x 1km pixels. The 21 target classes are based on the Joint Nature Conservation Committee (JNCC) Broad Habitats, which encompass the entire range of UK habitats.

  • Map service of soil types, geology and vegetation in the Moor House region of the Moor House - Upper Teesdale National Nature Reserve. The site lies in the North Pennine uplands of England and has an area of 74 km2. It is England's highest and largest terrestrial National Nature Reserve (NNR), a UNESCO Biosphere Reserve and a European Special Protection Area. Habitats include exposed summits, extensive blanket peatlands, upland grasslands, pastures, hay meadows and deciduous woodland. Altitude ranges from 290 to 850 m. Moor House - Upper Teesdale is part of the Environmental Change Network (ECN) which is the UK's long-term environmental monitoring programme.

  • This is a web map service of the UKCEH digital river network of Great Britain (1:50,000). It is a river centreline network, based originally on OS 1:50,000 mapping. There are four layers: rivers; canals; surface pipes (man-made channels such as aqueducts and leats) and miscellaneous channels (including estuary and lake centre-lines and some underground channels).

  • This web map service (WMS) depicts estimates of mean values of soil bacteria, invertebrates, carbon, nutrients and pH within selected habitats and parent material characteristics across GB . Estimates were made using CS data using a mixed model approach. The estimated means of habitat/parent material combinations using 2007 data are modelled on dominant habitat and parent material characteristics derived from the Land Cover Map 2007 and Parent Material Model 2009, respectively. Bacteria data is representative of 0 - 15 cm soil depth and includes bacterial community structure as assessed by ordination scores. Invertebrate data is representative of 0 - 8 cm soil depth and includes Total catch, Mite:Springtail ratio, Number of broad taxa and Shannon diversity. Gravimetric moisture content (%) data is representative of 0 - 15 cm soil depth Carbon data is representative of 0-15 cm soil depth and includes Loss-on-ignition (%), Carbon concentration (g kg-1) and Carbon density (t ha-1). Loss-on-ignition was determined by combustion of 10g dry soil at 375 deg C for 16 hours; carbon concentration was estimated by multiplying LOI by a factor of 0.55, and carbon density was estimated by combining carbon concentration with bulk density estimates. Nutrient data is representative of 0 - 15 cm soil depth and includes total nitrogen (N) concentration (%), C:N ratio and Olsen-Phosphorus (mg/kg). pH and bulk density (g cm-3) data is representative of 0 - 15 cm soil depth. Topsoil pH was measured using 10g of field moist soil with 25ml de-ionised water giving a ratio of soil to water of 1:2.5 by weight; bulk density was estimated by making detailed weight measurements throughout the soil processing procedure. Areas, such as urban and littoral rock, are not sampled by CS and therefore have no associated data. Also, in some circumstances sample sizes for particular habitat/parent material combinations were insufficient to estimate mean values.

  • This view shows a 1km resolution raster version of the Land Cover Map 2007 for Great Britain. Each 1km pixel represents the dominant aggregate class across the 1km area. The aggregate classes are aggregations of the target classes, broadly representing Broad Habitats (see below). The dataset is part of a series of data products produced by the Centre for Ecology & Hydrology known as LCM2007. LCM2007 is a parcel-based thematic classification of satellite image data covering the entire United Kingdom. The map updates and upgrades the Land Cover Map of Great Britain (LCMGB) 1990 and LCM2000. Like the earlier 1990 and 2000 products, LCM2007 is derived from a computer classification of satellite scenes obtained mainly from Landsat, IRS and SPOT sensors and also incorporates information derived from other ancillary datasets. LCM2007 was classified using a nomenclature corresponding to the Joint Nature Conservation Committee (JNCC) Broad Habitats, which encompasses the entire range of UK habitats. In addition, it recorded further detail where possible. The series of LCM2007 products includes vector and raster formats, with a number of different versions containing varying levels of detail and at different spatial resolutions.

  • This web map service (WMS) show Concentration Based Estimated Deposition (CBED) values of sulphur and nitrogen atmospheric deposition for 5x5 kilometre (km) grid squares of the UK averaged over the years 2017 to 2019. The maps show deposition values (keq ha-1 year-1) for sulphur, oxidised nitrogen and reduced nitrogen, and base cations. Total deposition is the sum of four components calculated separately: wet deposition, dry deposition of gases, dry deposition of particulate matter and cloud droplet deposition. Habitat-specific data are provided for (i) moorland/short vegetation everywhere, and (ii) forest everywhere. Additionally, the grid square average over multiple land cover types (i.e. arable, grassland, forest, moorland, urban) is also calculated. The habitat-specific data are recommended for use with critical loads for the calculation of critical load exceedances. The work in generating and compiling the dataset has been funded by the UK Centre for Ecology & Hydrology (UKCEH) and various Departments for Environment, Food & Rural Affairs (Defra) contracts.

  • This service provides a view of Environmental Change Network (ECN) site locations from which data are collected. There are 12 terrestrial sites and 45 freshwater sites. Sites range from upland to lowland, moor land to chalk grassland, small ponds and streams to large rivers and lakes. ECN is the UK's long-term environmental monitoring programme. A wide range of integrated physical, chemical and biological variables which drive and respond to environmental change are collated, quality controlled and made freely available for scientific research. The data form an important evidence base for UK environmental policy development. ECN is a multi-agency programme sponsored by a consortium of fourteen government departments and agencies. These organisations contribute to the programme through funding either site monitoring and/or network co-ordination activities. These organisations are: Agri-Food and Biosciences Institute, Biotechnology and Biological Sciences Research Council, Cyfoeth Naturiol Cymru - Natural Resources Wales, Defence Science & Technology Laboratory, Department for Environment, Food and Rural Affairs, Environment Agency, Forestry Commission, Llywodraeth Cymru - Welsh Government, Natural England, Natural Environment Research Council, Northern Ireland Environment Agency, Scottish Environment Protection Agency, Scottish Government and Scottish Natural Heritage.

  • This web map service (WMS) is the 1km raster, dominant target class version of the Land Cover Map 2015 (LCM2015) for Great Britain and Northern Ireland. It shows the target habitat class with the highest percentage cover in each 1km x 1km pixel. The 21 target classes are based on the Joint Nature Conservation Committee (JNCC) Broad Habitats, which encompass the entire range of UK habitats.