Ash transport by surface runoff using a laboratory flume-based experiment
This dataset describes measurements of transport of ash by surface runoff using a laboratory setup (flumes). In the experiment, three inflow rates (0.25, 1 and 2 L/min) were applied to two typical ash depths found after wildfires (1 and 3 cm). Variables measured include ash depth (cm), inflow rate (L/min), runoff rate (L/sec), ash transport rate (g/sec), ash concentration in the runoff (g/L). Full details about this nonGeographicDataset can be found at
https://doi.org/10.5285/351e2785-5a1e-4dbb-97c1-052f1290f0be
Simple
- Date (Publication)
- 2023-10-12
- Date (Creation)
- 2023-10-12
- Identifier
- doi: / 10.5285/351e2785-5a1e-4dbb-97c1-052f1290f0be
- Other citation details
- Neris, J., Doerr, S.H., Santin, C., Sanchez-Garcia, C., Robichaud, P.R. (2023). Ash transport by surface runoff using a laboratory flume-based experiment. NERC EDS Environmental Information Data Centre 10.5285/351e2785-5a1e-4dbb-97c1-052f1290f0be
- Access constraints
- otherRestrictions Other restrictions
- Other constraints
- no limitations
- Use constraints
- otherRestrictions Other restrictions
- Use constraints
- otherRestrictions Other restrictions
- Other constraints
- If you reuse this data, you should cite: Neris, J., Doerr, S.H., Santin, C., Sanchez-Garcia, C., Robichaud, P.R. (2023). Ash transport by surface runoff using a laboratory flume-based experiment. NERC EDS Environmental Information Data Centre https://doi.org/10.5285/351e2785-5a1e-4dbb-97c1-052f1290f0be
- Metadata language
- EnglishEnglish
- Character set
- utf8 UTF8
- Topic category
-
- Environment
- Distribution format
-
-
Comma-separated values (CSV)
()
-
Comma-separated values (CSV)
()
- OnLine resource
-
Download the data
Download a copy of this data
- OnLine resource
-
Supporting information
Supporting information available to assist in re-use of this dataset
- Hierarchy level
- nonGeographicDataset Non geographic dataset
- Other
- nonGeographicDataset
Conformance result
- Date (Publication)
- 2010-12-08
- Statement
- Six flumes were filled with ash (1 and 3 cm depth) and three inflow rates (L = 0.25 L/min, M = 1 L/min and H = 2 L/min) applied consecutively to each flume for 10 min in a different order to cover the six possible combinations (L-M-H, L-H-M, M-L-H, M-H-L, H-L-M, H-M-L). Six replicates per ash depth and inflow rate combination were conducted. Six runoff samples containing transported ash were taken at the flumes’ outlet at specific times (0, 1.5, 3, 6, 7.5 and 9). Samples were taken in plastic bottles for 15 seconds. Samples were weighed, dried (105 oC for 48 h) and weighed again to calculate runoff volume and ash weight. Inflow rate (L/min), runoff rate (L/sec), ash transport rate (g/sec), ash concentration (g/L) were calculated using the data obtained for the samples (volume, weight and time).
- File identifier
- 351e2785-5a1e-4dbb-97c1-052f1290f0be XML
- Metadata language
- EnglishEnglish
- Character set
- ISO/IEC 8859-1 (also known as Latin 1) 8859 Part 1
- Hierarchy level
- nonGeographicDataset Non geographic dataset
- Hierarchy level name
- nonGeographicDataset
- Date stamp
- 2025-11-13T16:16:01
- Metadata standard name
- UK GEMINI
- Metadata standard version
- 2.3
Point of contact
NERC EDS Environmental Information Data Centre
Lancaster Environment Centre, Library Avenue, Bailrigg
,
Lancaster
,
LA1 4AP
,
UK
https://eidc.ac.uk/
NERC Data Catalogue Service