• NERC Data Catalogue Service
  •  
  •  
  •  

Triaxial compressive strength data of tests conducted at elevated temperature on hydrothermalised basalt samples from Osa Peninsula (Costa Rica) and oceanic crust basalt from Cocos Plate

This dataset contains raw (clean but not interpreted) triaxial compressive strength data of tests conductive at elevated pressure and temperature as outlined in "Vannucchi, P., Clarke, A., de Montserrat, A., Ougier-Simonin, A., Aldega, L., & Morgan, J. P. (2022). A strength inversion origin for non-volcanic tremor. Nature Communications, 13(1), 2311. https://doi.org/10.1038/s41467-022-29944-8". The data is provided in a .zip folder containing the files of 5 experiments that are accompanied by a README file for introduction. Files format is Microsoft Excel Worksheet (.xlsx) and data are tabulated. Each file contains the corresponding relevant sample’s details, and each column of data is clearly labelled, units included. For each experiment, time, axial force, axial displacement, axial stress, confining displacement, confining pressure, axial strain A and B, axial average strain, circumferential extensometer, circumferential strain, volumetric strain, internal temperature, and axial delta P were recorded. Triaxial testing was undertaken using the MTS 815 servo-controlled stiff frame inside a vessel capable of a confining pressure up to 140 MPa at the Rock Mechanics and Physics Laboratory, British Geological Survey, UK. The confining cell is fitted with external heater bands and utilizing utilizes cascade control from internal and external thermocouples (accurate to ± 0.5°C). An initial axial pre-load of 2.3 kN was applied, to ensure a stable contact and alignment of the platens. The confining pressure vessel was then closed and filled with mineral oil confining fluid. The axial pre-load was maintained whilst the confining pressure was applied at 2 MPa/min to 60 or 120 MPa; these values were chosen to approximately bracket the pressures at the up-dip limit of seismic nucleation, corresponding to 2 – 4 km depth (Arroyo et al., 2014). At this point, whilst held in axial force and confining pressure control, the rig was heated at 2°C/min to 60°C to approximate the average temperature conditions at the depth of the up-dip limit of seismic nucleation (Harris and Spinelli, 2010). The samples were then left for approximately 1 hour allowing thermal equilibrium to be reached throughout the confining fluid and the samples. Once stable, axial loading was initiated in constant axial strain rate control at a rate of 5.0 x 10-6 s-1 until macroscopic failure occurred or a significant amount of post peak-stress axial strain was recorded (between 2% and 5%). We note that one test was conducted at the higher temperature of T=120°C with a result within 2.5% of the strength at T=60°C (Table 1). As this is below the expected sample-to-sample variability, no further temperature studies were conducted. The axial load, axial load actuator displacement, axial stress (s1), differential stress (Q=s1 - s3), confining pressure Pc (= s2= s3), confining pressure actuator displacement, axial strain (eax), circumferential strain (ecirc) and temperature were monitored throughout at sampling frequencies of 1s and 0.5kN. File names are: YYYY-MM-DD_LabProjectNumber_SiteName-SampleNumber

Simple

Date (Creation)
2023-09-26
Identifier
http://data.bgs.ac.uk/id/dataHolding/13608117
Originator
  Royal Holloway University of London - Alex Clarke
Distributor
  British Geological Survey - Enquiries
Environmental Science Centre, Nicker Hill, Keyworth , NOTTINGHAM , NOTTINGHAMSHIRE , NG12 5GG , United Kingdom
0115 936 3143
0115 936 3276
Originator
  British Geological Survey - Enquiries
Environmental Science Centre, Nicker Hill, Keyworth , NOTTINGHAM , NOTTINGHAMSHIRE , NG12 5GG , United Kingdom
0115 936 3143
0115 936 3276
Distributor
  British Geological Survey - Enquiries
Point of contact
  British Geological Survey - Enquiries
Maintenance and update frequency
notApplicable notApplicable
GEMET - INSPIRE themes, version 1.0
  • Geology
BGS Thesaurus of Geosciences
  • Compression tests
  • NGDC Deposited Data
  • Deformation (materials)
  • Stress
  • Basalt
  • Igneous rocks
  • Brittle deformation
  • Elastic theory
  • Strain
dataCentre
  • NGDC Deposited Data
Keywords
  • NERC_DDC
Access constraints
otherRestrictions Other restrictions
Other constraints
licenceOGL
Other constraints
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
Use constraints
otherRestrictions Other restrictions
Other constraints
The copyright of materials derived from the British Geological Survey's work is vested in the Natural Environment Research Council [NERC]. No part of this work may be reproduced or transmitted in any form or by any means, or stored in a retrieval system of any nature, without the prior permission of the copyright holder, via the BGS Intellectual Property Rights Manager. Use by customers of information provided by the BGS, is at the customer's own risk. In view of the disparate sources of information at BGS's disposal, including such material donated to BGS, that BGS accepts in good faith as being accurate, the Natural Environment Research Council (NERC) gives no warranty, expressed or implied, as to the quality or accuracy of the information supplied, or to the information's suitability for any use. NERC/BGS accepts no liability whatever in respect of loss, damage, injury or other occurence however caused.
Other constraints
Available under the Open Government Licence subject to the following acknowledgement accompanying the reproduced NERC materials "Contains NERC materials ©NERC [year]"
Metadata language
EnglishEnglish
Topic category
  • Geoscientific information
Geographic identifier
COCOS PLATE [id=978000]

Date (Creation)
1979

Geographic identifier
COSTA RICA [id=806000]

Date (Creation)
1979

Geographic identifier
CR

Date (Revision)
2009

Geographic identifier
CRI

Date (Revision)
2009

N
S
E
W
thumbnail


Begin date
2016-05-09
End date
2016-07-04
Unique resource identifier
WGS 84 (EPSG::4326)
Distribution format
  • MS Excel ()

Distributor
  British Geological Survey - Enquiries
Environmental Science Centre, Nicker Hill, Keyworth , NOTTINGHAM , NOTTINGHAMSHIRE , NG12 5GG , United Kingdom
0115 936 3143
0115 936 3276
Distributor
  British Geological Survey - Enquiries
OnLine resource
Data
OnLine resource
Digital Object Identifier (DOI)
Hierarchy level
dataset Dataset
Other
dataset

Conformance result

Date (Publication)
2011
Explanation
See the referenced specification
Pass
No

Conformance result

Date (Publication)
2010-12-08
Explanation
See http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2010:323:0011:0102:EN:PDF
Pass
No
Statement
This dataset contains raw (clean but not interpreted) triaxial compressive strength data of tests conductive at elevated pressure and temperature as outlined in "Vannucchi, P., Clarke, A., de Montserrat, A., Ougier-Simonin, A., Aldega, L., & Morgan, J. P. (2022). A strength inversion origin for non-volcanic tremor. Nature Communications, 13(1), 2311. https://doi.org/10.1038/s41467-022-29944-8". The data is provided in a .zip folder containing the files of 5 experiments that are accompanied by a README file for introduction. Files format is Microsoft Excel Worksheet (.xlsx) and data are tabulated. Each file contains the corresponding relevant sample’s details, and each column of data is clearly labelled, units included. For each experiment, time, axial force, axial displacement, axial stress, confining displacement, confining pressure, axial strain A and B, axial average strain, circumferential extensometer, circumferential strain, volumetric strain, internal temperature, and axial delta P were recorded. Triaxial testing was undertaken using the MTS 815 servo-controlled stiff frame inside a vessel capable of a confining pressure up to 140 MPa at the Rock Mechanics and Physics Laboratory, British Geological Survey, UK. The confining cell is fitted with external heater bands and utilizing utilizes cascade control from internal and external thermocouples (accurate to ± 0.5°C). An initial axial pre-load of 2.3 kN was applied, to ensure a stable contact and alignment of the platens. The confining pressure vessel was then closed and filled with mineral oil confining fluid. The axial pre-load was maintained whilst the confining pressure was applied at 2 MPa/min to 60 or 120 MPa; these values were chosen to approximately bracket the pressures at the up-dip limit of seismic nucleation, corresponding to 2 – 4 km depth (Arroyo et al., 2014). At this point, whilst held in axial force and confining pressure control, the rig was heated at 2°C/min to 60°C to approximate the average temperature conditions at the depth of the up-dip limit of seismic nucleation (Harris and Spinelli, 2010). The samples were then left for approximately 1 hour allowing thermal equilibrium to be reached throughout the confining fluid and the samples. Once stable, axial loading was initiated in constant axial strain rate control at a rate of 5.0 x 10-6 s-1 until macroscopic failure occurred or a significant amount of post peak-stress axial strain was recorded (between 2% and 5%). We note that one test was conducted at the higher temperature of T=120°C with a result within 2.5% of the strength at T=60°C (Table 1). As this is below the expected sample-to-sample variability, no further temperature studies were conducted. The axial load, axial load actuator displacement, axial stress (s1), differential stress (Q=s1 - s3), confining pressure Pc (= s2= s3), confining pressure actuator displacement, axial strain (eax), circumferential strain (ecirc) and temperature were monitored throughout at sampling frequencies of 1s and 0.5kN. File names are: YYYY-MM-DD_LabProjectNumber_SiteName-SampleNumber
File identifier
089b258b-84ed-24e8-e063-0937940a88b8 XML
Metadata language
EnglishEnglish
Hierarchy level
dataset Dataset
Date stamp
2025-11-13
Metadata standard name
UK GEMINI
Metadata standard version
2.3
Point of contact
  British Geological Survey
Environmental Science Centre, Keyworth , NOTTINGHAM , NOTTINGHAMSHIRE , NG12 5GG , United Kingdom
+44 115 936 3100
Dataset URI
http://data.bgs.ac.uk/id/dataHolding/13608117
 
 

Overviews

overview

Spatial extent

N
S
E
W
thumbnail


Keywords


Provided by

logo

Share on social sites

Access to the portal
Read here the full details and access to the data.

Associated resources

Not available


  •  
  •  
  •