This dataset comprises ECLIPSE input decks for a 3D reservoir simulation of the CO2 plume at the Sleipner CO2 injection site. This whole reservoir model is an attempt to history match the growth of the plume observed on seismic data. A seismic velocity and density model derived from the 3D reservoir simulation is also included, together with a series of Seismic Unix scripts to create a synthetic seismic section through the Sleipner reservoir model, for comparison with released time-lapse seismic data.
Data for NERC grant NE/L000660/1. This is the data supporting Fig. 4 of the publication: Ebigbo, A., Lang, P. S., Paluszny, A., and Zimmerman, R. W. (2016). Inclusion-based effective medium models for the permeability of a 3D fractured rock mass. Transport In Porous Media, DOI: 10.1007/s11242-016-0685-z. It contains numerically computed permeabilities for various realisations of fracture networks. There are six different cases (as explained in the paper).
The download .rar file contains a groundwater model of the coastal aquifer in Kwale County, Kenya (ModelMuse Text File) produced by Dr Nuria Ferrer and Dr Albert Folch at the Universitat Politècnica de Catalunya. The model can be used to explore future climate and groundwater abstraction scenarios to provide management recommendations. The download does not include proprietary abstraction data from industry project partners, thus running the model provided here will not reproduce published research findings. The file named”np67IH.bhd” are the initial heads file required to run the model.
The data are the gridded recharge values obtained from the BGS distributed recharge model (ZOODRM) driven by 11 Ensembles of the HaDCM3 Regional Climate Model (RCM) taken from the Future Flow and Groundwater Level data set (http://www.ceh.ac.uk/our-science/projects/future-flows-and-groundwater-levels). The model covers the mainland areas of England, Scotland and Wales. The 11 ensembles are run from January 1950 to December 2099. The dataset themselves are the gridded (2 km by 2 km) outputs from the recharge model averaged over four time horizons: historical, 20s, 50s, and 80s, for each of the 11 ensembles. The results can be used to assess the impact of climate change on potential recharge (soil drainage) for catchments in mainland England, Scotland and Wales.
This data was collected as a part of the UK CCS Research Centre Call 2 Project C2-197: Multi scale characterisation of CO2 Storage in the United Kingdom. This is tabular data and X-ray imagery of drainage and imbibition relative permeability measured on reservoir rocks from the S. North Sea, N. North Sea, and E. Irish Sea of the Offshore UK. The data were obtained through measurements made at two distinct flow rates to allow for an evaluation of the impact of rock heterogeneity. Full details of the rock properties and experiments can be found in Reynolds et al. (2018) reference 3 below, the Final Report of the Project, as well as in the PhD Thesis of Catriona Reynolds with full references given below. Any use of the data should reference the journal article, reference 3 below. Geographical Area - Bunter sandstone in S. North Sea, Cleethorpes-1 Well, 1312.7-1316.1 m depth; Ormsirk sandstone in E. Irish Sea, Block 110/2a, 1247.9-1248.1 m depth; Captain sandstone in N. North Sea, Well 14/29a-3, 2997.6-3005.1 m depth. References 1. Imperial College London and British Geological Survey, Multiscale Characterisation of CO2 Storage in the United Kingdom, UKCCSRC Call 2 Project Final Report, 2016 2. Reynolds, C. Two-phase flow behaviour and relative permeability between CO2 and brine in sandstones at the pore and core scales, PhD Thesis, 2016, Imperial College London. 3. Reynolds, C.A., Blunt, M.J., Krevor, S. 2018, Multiphase flow characteristics of heterogeneous rocks from CO2 storage reservoirs in the United Kingdom, Water Resources Research, 54, 2, 729-745
Data output from the numerical flow modelling in GRL manuscript ""Evidence for the top-down control of lava domes on magma ascent dynamics"", by Marsden, L., Neuberg, J. & Thomas, M., all of University of Leeds. The models were created using the Laminar Flow module in COMSOL Multiphysics v5.4 by L. Marsden. The following files are uploaded: Archive_Reference_Model.txt (Reference flow model: Gas loss function, Initial H2O content = 4.5 wt.% Excess pressure at depth = 10 MPa, Constant corresponding to crystal growth rate = 4e-6 s^-1 ) Archive_High_H2O.txt (Gas loss function, Initial H2O content = 10 wt.% Excess pressure at depth = 10 MPa, Constant corresponding to crystal growth rate = 4e-6 s^-1) Archive_No_Gas_Loss.txt (No gas loss, Initial H2O content = 4.5 wt.% Excess pressure at depth = 10 MPa, Constant corresponding to crystal growth rate = 4e-6 s^-1) Archive_Gamma_Low.txt (Gas loss function, Initial H2O content = 4.5 wt.% Excess pressure at depth = 10 MPa, Constant corresponding to crystal growth rate = 1e-6 s^-1) Archive_Excess_Pressure_0MPa.txt (Gas loss function, Initial H2O content = 4.5 wt.% Excess pressure at depth = 0 MPa, Constant corresponding to crystal growth rate = 4e-6 s^-1) Archive_Excess_Pressure_20MPa.txt (Gas loss function, Initial H2O content = 4.5 wt.% Excess pressure at depth = 20 MPa, Constant corresponding to crystal growth rate = 4e-6 s^-1) The files uploaded include the reference flow model and where a single key parameter has been changed in the flow modelling. We include data where the key parameter is at the upper or lower limit of the values tested. Data are not included where magma ascent is modelled to stall without the extrusion of a lava dome, as a time dependent model is not run in this case. A solution is provided using equilibrium modelling only. The following variables are output, at conduit centre unless specified: Depth (m), Time(s), Ascent velocity (m/s), Bulk Viscosity (Pa s), Crystal Content, Dome height (m), Gas Volume Fraction, Overpressure (Pa), Shear Stress at Conduit Wall (Pa)
UKCCSRC Call 2 Project C2-197 - The dataset comprises a series of ECLIPSE 100 input decks describing reservoir models of potential CO2 storage sites in the Southern North Sea and East Irish Sea offshore UK. The models were developed to test the effect of relative permeability hysteresis on the geological storage of CO2. The models incorporate new relative permeability datasets measured by Imperial College, London as part of the CO2MULTISCALE project.
The data presented here contains the experimental X-ray CT dataset used for the paper "Characterising Drainage Multiphase flow in Heterogeneous Sandstones" by Jackson, Krevor et al (DOI 10.17605/OSF.IO/WCXNY), along with CMG IMEX modelling files. Core averaged pressure data and saturations, along with 1D saturation profiles are available in the supporting information fle. CT data is provided in the four '..._scans' folders. These contain reconstructed .dicom tomographs from X-ray CT imaging with native resolution 0.234375mm x 0.234375mm. The image thickness is 5mm for the Bentheimer and 3mm for the Bunter. Each files contains 3x scans for each fractional flow. Dry, water, brine equilibrated with CO2 (labelled SW), nitrogen and CO2 background scans are also provided, which are obtained after single phase core flooding. CMG IMEX .dat files contain the necesary input files for CMG IMEX to run the numerical core flood simulations (the low flow rate core flood examples are included). These have associated .inc files for the 3D capillary pressure scaling (the end point of the capillary pressure curve at irreducible water saturation) and the 3D porosity map. These are read into the simulation files on execution. The porosity and capillary pressure files are for the final, full length rock cores used to produce the main figures in the paper (Figure 5 onwards). The outputs from the CMG IMEX simulation can be read into the 3D results viewer where 3D saturations and pressure drops are obtained. This work was funded by the Natural Environment Research Council (Grant number: NE/N016173/1).
General circulation model (HadCM3) output of the study by Matero et al. (2017) “The 8.2 ka cooling event caused by Laurentide ice saddle collapse. Data has been processed into netCDF4 - timeseries, and includes the following variables at model resolution: ocean temperature, ocean salinity, precipitation, air temperature at 2m height, depth of the oceanic mixed layer, sea ice concentration and meridional overturning circulation strength. The atmosphere component of the model has a horizontal resolution of 2.5° x 3.75° with 19 unevenly spaced vertical layers. The ocean component has a horizontal resolution of 1.25° x 1.25° with 20 unevenly spaced vertical layers. For more information see published paper, https://doi.org/10.1016/j.epsl.2017.06.011
Experimental results used to parameterise and a test a mathematical model of uranium diffusion and reaction in soil. The exeperiments and model are described in Darmovzalova J., Boghi A., Otten W., Eades, L., Roose T. & Kirk G.J.D. (2019) Uranium diffusion and time-dependent adsorption-desorption in soil: a model and experimental testing of the model. Eur. J. Soil Sci., doi: 10.1111/ejss.12814. The research was funded by NERC, Radioactive Waste Management Ltd and the Environment Agency through the Radioactivity and the Environment (RATE) programme (Grant Ref NE/L000288/1, Long-lived Radionuclides in the Surface Environment (LO-RISE)).