The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN contaminants and biological effects in sediment data start in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).

The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN dataset starts in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).

The dataset contains hydrographic, biogeochemical and biological measurements of ocean and seabed sediment properties. Hydrographic profiles provided measurements of temperature, salinity, dissolved oxygen and fluorescence to accompany biogeochemical and biological samples, including concentrations of nutrients, particulate organic carbon (POC) and particulate organic nitrogen (PON). Emphasis was placed on the collection of benthic data, with numerous core samples being collected and analysed for pigments, biomarkers, lipids and other organic compounds. Samples were also collected and analysed for Holothurian species, while a large volume in situ filtration system was used to measure biogeochemical variables including POC and PON, and particulate iron. Station data were supplemented by continuous underway measurements of bathymetry, current velocities, sea surface salinity, temperature, fluorescence and beam attenuation across the survey area. These were accompanied by underway measurements of surface meteorological parameters including irradiance, air temperature, humidity, sea level pressure and wind velocities. The data were collected across the Crozet Plateau in the Southern Indian Ocean between 1st December 2005 and 14th January 2006 on RRS Discovery cruise D300. Data collection focused on four sites, with repeated hydrographic profiles, water and sediment samples collected at each location. In total, 89 instrumentation deployments were carried out at the four stations, including a conductivity-temperature-depth (CTD) package and a Megacorer (for sediment sampling). The underway system utilised a hull-mounted acoustic Doppler current profiler (ADCP) as well as a thermosalinograph and other standard surface hydrographic and meteorological instruments. Further data were collected using a variety of equipment including an otter trawl (net) and submersible cameras but these data are currently held by the data originators and are undergoing processing so are not included in the parameter and instrument lists above. The principal objective of Benthic CROZEX was to assess the manner in which biogeochemical composition and flux of organic matter to the deep-sea floor drives benthic community structure, dynamics and diversity at sites with contrasting primary production regimes. Investigators from British Antarctic Survey (BAS), Natural History Museum (NHM), National Oceanographic Centre (NOC) and the National University of Ireland, Galway (NUIG) were involved. Data management is being undertaken by the British Oceanographic Data Centre (BODC) but data processing is ongoing and various data are yet to be submitted to BODC.

The Northern Seas Programme dataset comprises hydrographic, biogeochemical, biological and meteorological data. Hydrographic profiles provided measurements of parameters such as temperature, salinity, fluorescence and dissolved oxygen, while current velocities and acoustic backscatter were also measured. A comprehensive water sampling program permitted the collection of biogeochemical data including concentrations of various organic compounds, dissolved gas concentrations and radioactivity. Water samples were also analysed for phytoplankton, zooplankton and viruses. Larger biological samples were obtained from the water column using trawl nets and cetacean distributions were monitored using hydrophone arrays. Sediment samples were collected at various locations and analysed for biogeochemical parameters and zoobenthos. Sample data were supplemented by those derived from experiments, while bathymetry and meteorological parameters were measured across the study area. Data collection was undertaken in the Irish and northern North Seas, across the NE Atlantic and up to the marginal Arctic pack ice zone. This includes the territorial waters of the UK, Norway and the Russian Arctic, and extends from coastal fjords to the ocean margins. The data were collected during the period 2001-2007 over a number of cruises: RRS Discovery cruise D257, RRS James Clark Ross cruises JR75 and JR127, RRS Charles Darwin cruise CD176 and FS Poseidon cruise PO300/2. Measurements were taken using a variety of instrumentation, including conductivity-temperature-depth (CTD) profilers with attached auxiliary sensors, bathymetric echosounders, sediment samplers, trawl nets and acoustic Doppler current profilers (ADCPs), while incubation chambers were used for shipboard experiments. The programme was designed to advance the understanding of how marine systems in Northern Seas respond to environmental and anthropogenic change and was developed in three themes: Theme A - Understanding fjordic systems insights for coastal and oceanic processes; Theme B - Ocean Margins: the interface between the coastal zone and oceanic realm; Theme C - Measuring and modelling change: sea sensors and bioinformatics. Theme B included the Ellett Line Time Series. The Northern Seas Programme was co-ordinated by the Scottish Association for Marine Science (SAMS). Data from the programme are held at the British Oceanographic Data Centre.

The dataset comprises physical, biogeochemical and biological oceanographic, surface meteorological and benthic measurements. Hydrographic profiles including temperature, salinity, fluorescence, transmissance and suspended sediment concentration were collected at numerous stations, while surface hydrographic (fluorescence, transmissance, sea surface temperature, salinity) and meteorological (irradiance, air temperature, humidity, wind speed/direction) data were collected across the survey areas. Sediment, pore water and water column samples were also collected for biogeochemical analysis, as were biological samples for the purposes of species classification and abundance analyses. The data were collected across the Indian Ocean, Arabian Sea and Pakistan margin areas between March and October 2003. Data collection was undertaken by the RRS Charles Darwin during four cruises: CD145 (12 March 2003 to 9 April 2003), CD146 (12 April 2003 to 30 May 2003), CD150 (22 August 2003 to 15 September 2003) and CD151 (17 September 2003 to 20 October 2003). Conductivity-temperature-depth (CTD) profilers with auxiliary sensors, benthic samplers and nets were deployed from the ship, while underway sensors provided continuous surface ocean, meteorological and bathymetric data. The study was designed to investigate an oxygen-minimum zone (OMZ) in the northern Arabian Sea. Chief Investigators include Gregory L Cowie (University of Edinburgh School of GeoSciences) and Brian J Bett (Southampton Oceanography Centre), while other institutions including the Dunstaffnage Marine Laboratory, University of Liverpool and Netherlands Institute of Ecology were also involved in the research. Data management is being undertaken by BODC. Some of the data are still undergoing processing at BODC and further data are expected from originators in the future.

The dataset contains hydrographic and biogeochemical data, including continuous underway measurements of surface temperature, salinity, nutrients, chlorophyll and attenuance, irradiance and bathymetric depth. Underway dissolved oxygen and/or trace metal measurements were also collected on occasion. Hydrographic profiles of temperature, salinity, transmittance, fluorescence, dissolved oxygen (data often of poor quality) and scalar irradiance were undertaken, and associated water samples were routinely analysed for suspended particulate material (SPM), chlorophyll, nutrients and particulate organic carbon/particulate organic nitrogen (POC/PON). In addition, dissolved and particulate trace metals, production, contaminants, dissolved organic carbon/total dissolved nitrogen (DOC/TDN) were determined in some cases. Benthic measurements were also collected, including benthic flux determinations (microcosm experiments), sediment characterisation, pore water chemistry measurements and the quantification of the benthic macrofauna. The coastal oceanographic data set was collected along the east coast of England between Great Yarmouth and Berwick upon Tweed. Data were collected between December 1992 and July 1995 during a series of 17 RRS Challenger cruise legs. Most cruises covered two survey grids: one from Great Yarmouth to the Humber designed around the distribution of the sandbanks and a second simple zig-zag grid from the Humber to Berwick on Tweed. A large number of anchor stations, usually over one or two tidal cycles, were worked in the vicinity of the Humber mouth or the Holderness coast. Each cruise leg returned underway data and conductivity-temperature-depth (CTD) data and water bottle rosette samples from grid nodes. A Lasentech in-situ particle sizer was used to obtain grain size distributions at spot depths for each CTD station on many of the cruise legs. Box and multicorer samples were collected on approximately one third of the cruise legs. The River-Atmosphere-Coast Study (RACS) was the component of the Land Ocean Interaction Study (LOIS) programme looking at processes from the river catchment into the coastal sea. Investigators include representatives of Plymouth University, Southampton University, Liverpool University, University of East Anglia, Newcastle University, Plymouth Marine Laboratory, and the University of Wales, Bangor. All data sets collected during the RACS Challenger cruises are held by the British Oceanographic Data Centre (BODC). All underway and CTD data have been fully calibrated and quality controlled by BODC. The water sample and benthic data sets have been quality controlled by the data originators and submitted to BODC. The data are held in the BODC project database and have been published as part of a fully documented CD-ROM product.

The data set includes hydrographic profiles (including temperature, salinity, attenuance, chlorophyll, oxygen, irradiance, turbulence, sound velocity and currents), hydrographic time series (temperature, currents, fluorescence, bottom pressure), water samples (>70 parameters measured), sediment samples (>160 parameters measured), sediment trap samples (>10 parameters measured), production experiments and marine snow camera profiles. Additional meteorological and wave records are also available, as well as satellite imagery and underwater photography (water column and seabed). The data were collected on the Hebridean Slope (NW of Ireland) between March 1995 and September 1996. Measurements were collected via a combination of shipboard instrument deployments, including >1,800 conductivity-temperature-depth (CTD) and SeaSoar (undulating oceanographic recorder) profiles, >100 expendable bathythermograph (XBT) profiles, >38,000 acoustic Doppler current profiler (ADCP) profiles, >35 core profiles, >800 turbulence profiles, >40 marine snow camera profiles, >55 radiometer profiles and >25 sound velocity and travel time experiments. Benthic lander deployments were also undertaken, along with shipboard incubation experiments and drifting buoy deployments (48 tracks). An intensive water sampling programme provided >2,500 samples for biological and biogeochemical analysis. An extensive moored instrument array was maintained throughout the experiment, including sediment traps, recording current meters (104 series), electromagnetic current meters (9 series), ADCPs (16 series), thermistor chain and temperature probes (70 series), fluorometers (18 series), transmissometers (16 series), light meter (5 series), bottom pressure recorders (11 series), plus one waverider buoy series and three meteorological buoy time series. The Shelf Edge Study (SES) was an intensive multidisciplinary experiment and formed part of the NERC Land Ocean Interaction Study. The British Oceanographic Data Centre (BODC) assembled over 95% of the data sets collected during SES into its project database system. Once basic quality control procedures had been completed the data set was published, complete with extensive data documentation, on CD-ROM.

The dataset comprises hydrographic data, including salinity, temperature, depth, dissolved oxygen, transmittance (for suspended sediment), chlorophyll, irradiance, and current velocities. Both oceanographic and benthic measurements of nutrients (nitrate, nitrite, silicate, phosphate and ammonium), phytoplankton and zooplankton abundance, dissolved and particulate trace metals, primary and bacterial production, sulphur compounds and halocarbons were collected, as well as atmospheric physical and chemical measurements. The data were collected in the North Sea between August 1988 and October 1990 over a series of 38 cruises on RRS Challenger. Oceanographic measurements were taken using hydrographic profilers, moored instruments and shipboard underway systems. Underway meteorological data were also collected in addition to a comprehensive atmospheric sampling programme. Both continuous and discrete water samples were collected, providing biogeochemical and biological data. These were supplemented by net hauls. Benthic processes were investigated with sediment cores taken on eight survey cruises at six sites of varied character, three being in the area of summer stratification. Water and benthic sample analyses were supplemented by results of seabed and shipboard incubation experiments. The North Sea Project evolved from a NERC review of shelf seas research, which identified the need for a concerted multidisciplinary study of circulation, transport and production. The Proudman Oceanographic Laboratory (POL), now the National Oceanography Centre (NOC) hosted the project. It involved over 200 scientists and support staff from the Natural Environment Research Council (NERC), the Ministry of Agriculture, Fisheries and Food (MAFF - now DEFRA) and other academic institutes. The data are held at the British Oceanographic Data Centre and are available on CD-ROM.

The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing well over 1000 parameters. There are data from over 1000 conductivity-temperature-depth (CTD)/rosette stations, over 440 core profiles, over 180 sediment trap samples, over 140 net hauls and much, much more. The primary study area was a box extending to the base of the slope from Vigo to Cap Finistere. However, data are included from both further offshore (filament tracking) and from the Portuguese Margin. Measurements were taken from November 1996 to October 1999 during 33 cruise legs, involving research vessels from seven nations. Data were collected using a variety of equipment and techniques, including expendable bathythermographs (XBTs), turbulence probes, CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and a comprehensive water sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and phosphate uptake experiments are also included in the dataset, as are bathymetric data from multibeam (swath) surveys, coastal upwelling measurements and data from moored instruments and benthic landers. The dataset also includes imagery from satellites, seabed photography and X-ray photographs of core samples. The aim of the project was study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. The project brought together over 100 scientists from 40 research centres and universities throughout Europe. The British Oceanographic Data Centre (BODC) is assembling the data sets collected during OMEX II into its project database system and the data set is also available on CD-ROM.

The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing over 1000 parameters. There are data from over 1650 conductivity-temperature-depth (CTD)/rosette stations, over 300 core profiles, over 370 sediment trap samples and much, much more. Most of this effort was directed at the region of the east Atlantic margin between La Chapelle Bank and the Goban Spur (between France and Ireland). In addition, there were two secondary areas of interest: the Norwegian Shelf Break just off Tromso and the Iberian Margin, either off Vigo or in the vicinity of the Tagus estuary. Measurements were collected from April 1993 until the end of December 1995 during 55 research cruise legs. Data were collected using a variety of equipment and techniques, including expendable bathythermography (XBTs), CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and comprehensive water and air sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and trace metal experiments are also included in the dataset, as are bathymetric data from the British Oceanographic Data Centre (BODC) GEBCO digital Atlas, air-sea flux measurements and data from moored instruments and benthic landers that were deployed for periods from a few weeks to a year. The dataset also includes imagery from satellites, water column and seabed photography, scanning electron micrographs and X-ray photographs. FORTRAN source code for biogeochemical models developed during OMEX I is also included. The aim of the project was to study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. OMEX I involved scientists from 30 institutions in 10 countries. BODC is assembling the data sets collected during OMEX I into its database system and the data are also available on CD-ROM.